片语

Combined mould cavity组合式型腔

mixing mould-cavity复杂型腔

injected mould cavity注射模型腔

mould cavity connectivity型腔连通性

mould cavity enlargement型腔扩大

plastic mould cavity塑料模型腔

Complicated mould cavity复杂形腔

surface of mould cavity型腔壁面

venting of mould cavity型腔排气

英汉例句

• forging defects of mould cavity non-saturate, crack, pucker and shearing edge avulsion, etc. on the astrictive clamps and operating scissors are studied by means of appearance and metallography.

  采用外观和金相方法，对止血钳和手术剪锻坯出现的型腔填充不满、裂纹、重皮和切边撕裂等缺陷进行分析。

• because of the structural feature, it is much more difficult for plastics to fill the mould cavity of mini parts than that of normal parts.

  由于微型件结构上的特点，微结构注射充满型腔的能力要比常规注射差得多。

• therefore, how to improve the nc machining efficiency of mould cavity without losing machining quality has become an urgent problem to be solved.

  因此，如何在保证加工质量的前提下，提高模具型腔的数控加工效率成为一个亟待解决的难题。

• the total working size of a mould cavity is formed by the combination and accumulation of the sub-working sizes of the forming parts during the assembly process.

  根据尺寸链原理，对在不同成型零件装配成模腔的过程中，由不同工作尺寸组合和累积而间接形成的工作尺寸的计算问题进行分析探讨；

• hydraulic pressure switchover the packing of the melt in the mould cavity has to be balanced by the hydraulic pressure driving the screw forward.

  液压缸压力转换熔融塑料在模腔的填充平衡需要液压缸压力驱动螺桿前进来保证。

• a mould cavity is formed between the neighboring modules which can be disassembled and two side walls of the track groove.

  在相邻的可拆卸模块和轨道槽两侧壁之间形成模腔；

• the structure design of combined mould cavity and core assembly and the manufacturing method of mould were introduced in detail.

  详细介绍了组合式型腔、型芯的结构设计及模具的制造方法。

• in order to ensure the forming accuracy of castings, it is necessary to consider the compensation for the shrinkages in the mould cavity for turbine blades brought by the solidification process.

  为了保证精铸件的成形精度，制造所用的模具型腔必须对铸件的收缩变形进行补偿。

• on the other hand, simulate the interference fitting process to get the deformation distribution of the mould cavity by steel mould correlation method.

  另一是用钢模比拟法对扁挤压筒预紧装配过程进行模拟，获得了挤压筒内孔型腔变形规律。

• according to the structure feature of bearing seat product, design a three-plate type mold structure whose mould cavity is compulsive demolding.

  根据支承座产品的结构特点，设计了一种型腔强制脱模的三板式模具结构。

• a practical machining of injection mould cavity is taken as an example to show that hsm is one of developing trends in modern mould making.

  同时以加工实例说明高速切削是现代模具加工的发展方向之一。

• this paper deals with the flowing phenomena of liquid metal in lift tube, crucible, and mould cavity in low pressure casting.

  分析了低压铸造中液态金属在升液管、坩埚、型腔中的流动现象。

• problems of mould cavity connectivity caused by the errors were discussed.

  对由该误差引起的型腔连通性进行了探讨。

• gas hole and inclusion can be reduced by properly increasing thickness, and quality of the chilling layer, uniformly spraying and cleaning the mould cavity on time.

  适度增加激冷层厚度，提高激冷层品质，均匀喷涂并及时清理模具型腔，可减少气孔和夹杂物缺陷。

• when the mould cavity take products, cores beginning heating.

  当模具开模取制品时，型芯开端加热。

• test unit made by oneself was adopted, the data of injection mould cavity average pressure were first got from checkout in home. in addition, they can be dynamically shown and automatically recorded.

  本文采用自行研制的测试装置，在国内首次测得注塑模具模腔平均压力的数据，并能达到动态显示、自动记录。

• mould cavity should be protected when the mould is heated for quench hardening.

  模具在淬火加热时，型腔本身需要保护。

• this paper introduces how to manufacture the frp mould for rtm and the size and the thickness of mould cavity is quite accurate through choosing raw materials and controlling process technology.

  本文主要介绍了通过原材料的选用与工艺过程的控制来制作尺寸与模腔厚度比较精确的rtm模具。

• the strategy of mould cavity roughing oriented machining features and cutting tool life is also presented in this paper.

  提出一种面向加工特征、考虑刀具寿命的模具型腔粗加工策略。

• a sensor, in the form of an electrically conducting rod (25), is disposed so that its tip forms one part of the bottom of the mould cavity (14).

  设置以导电桿（25）形式的传感器，使其尖端形成模腔（14）底 部的一部分。