片语

passage beds[地质] 过渡层

truss stiffened transition layer桁架式转换层

transition boundary layer过渡边界层

SiO2 transition layer碳化硅过渡层

Structure transition layer结构过渡层

transition alloy layer过渡合金层

transition layer element过渡层单元

transition-layer capacitance过渡层电容

depletion layer[电子] 耗尽层；过渡层；空乏层

transition interfacial layer过渡界面层

英汉例句

• It is found that the transition layer composed of closed-cell with tight and smaller pore-size pores makes the asymmetriC membrane benefit of gas separation.

  并发现以紧密而孔径小的闭口空胞组成的过渡层对不对称膜的气体分离有利。

• At the same time, double compound layer which was composed of metal transition layer with high hardness and ceramic layer improved the service life and safe stability of the composite pipes greatly.

  同时，高硬度的金属过渡层与陶瓷层组成的双层复合结构使复合管的使用寿命和安全稳定性显着提高。

• The surface transition layer makes the film surface smoothness greatly improve and the dynamic friction coefficient decrease.

  镀有过渡膜的样品具有最为平整的表面形貌和最小的表面动摩擦系数。

• There are two difficult points in the thick plate transition layer of the high-rise building. The first point is the security of load transfer, and the second is the control of mass concrete cracks.

  高层建筑厚板转换层施工有两个难点，一是荷载安全传递问题，二是大体积混凝土裂缝控制问题。

• The structure of adhesive phase and transition layer in bright layers are mixed type of martensite.

  白亮层中的粘结相以及过渡层的组织均为混合的马氏体组织。

• But the salt of saturated zone is relatively stable whenever the salt content in high or low. Therefore, the transition layer has a remarkable isolation effect of salt movement.

  但过渡层以下的饱和层盐分，不管含盐量高低，均处于相对稳定状态。过渡层对下层高含盐的隔离作用显着。

• The results indicated that the microstructure of the transition layer is a structure of fine columnar crystal-cystiform dentrite-dentrite.

  结果表明，梯度过渡层的组织形态为细小的柱状晶-胞状树枝晶-树枝状晶。

• Welding material selection of transition layer refers to the following table.

  过渡层焊接材料的挑选参睹上里。

• Adopting the nickel aluminum alloy as the transition layer has simplified the production process of the combination transition layer and improved the combination intensity of the body.

  采用镍铝合金作为过渡层，简化了结合过渡层工艺，提高了与本体的结合强度。

• Some useful discussion is carried on to perfect the design of thick plate transition layer of high-rise buildings, and some valuable conclusions are achieved.

  本文的工作为进一步完善高层建筑转换层厚板的设计做了有益的探讨，得到了一些有价值的结论。

• The brake block structure consists of steel back and friction material, and the latter can be divided into transition layer and working lining.

  剎车块结构由钢背和摩擦材料两大部分组成，其中摩擦材料又分为过渡层和工作层。

• With increasing sintering temperature, the joint of graphite and BN was increased and also there was transition layer in the interfaces relative to HP.

  随着烧结温度的升高，元素扩散加剧，过渡层的厚度越厚，材料的层间界面结合强度升高，石墨层与BN层结合的越好。

• Modern analytical methods have been used to investigate the patterns of fusion zone and the diffusion behaviors of elements by tig direct welding and tig with Sn as transition layer welding.

  利用现代分析测试手段分别研究了TIG焊直接焊接镁铝和镀锡焊接镁铝的焊缝熔合区形貌，并对其进行了元素扩散行为的分析及比较。

• The thickness of transition layer of crystal polymer is generally calculated by one dimensional electron density correlation function.

  一般用一维电子密度相关函数来计算结晶聚合物的过渡层厚度。

• A transition layer was used to increase the bonding strength between tungsten and molybdenum, thus improve the working performance of X-ray tube.

  研究了如何采用合适的过渡层材料，提升钨钼的结合强度，以提高射线管的工作性能。