片语

tube shear wall剪力墻筒体

tube-wall overtemperature管壁超温

tube-wall atomization管壁原子化

pipe wall管壁

tube-wall thermocouple管壁热电偶

tube inner wall油管内壁

rifled tube water wall内螺纹水冷壁

英汉例句

• To well control the tube wall temperature of reformer, well adjust top spring hanger on the reformer tube and well control the flame from burner on the top of furnace is important during operation.

  在操作中，要控制好转化炉管的壁温，调整好转化炉管顶部的弹簧吊架，调节好炉膛顶部的烧嘴火焰。

• The paper introduces a new rotating speed measuring method for diesel engine utilizing pressure pulse signal on the tube wall of high pressure fuel injection system of diesel engine.

  本文介绍一种利用柴油机高压泵喷油管壁上的压力波脉沖信号，来测量柴油机转速的新方法。

• Furnace and back-end enclosure wall all adopt membrane wall structure. The outside of tube wall is insulation material and is covered with trapezoid corrugated outer protection plate.

  炉膛及尾部包墻均采用膜式壁结构，管壁外侧为保温材料并罩上梯形波纹外护板。

• Abraded by flying ash and blowing ash, the tube wall of low temperature superheater of HP boiler was thinned during operation.

  高压锅炉过热器在运行中受到飞灰、吹灰磨损，导致管壁减薄。

• The tube wall of the exposed end of the flushing tube is intertwined by the section of the drainage tube.

  沖洗管外露段管壁由引流管的材料延续包 绕。

• When the tube radius is far greater than the coil size the tube wall can be considered as a conducting plate that can be easily simulated.

  当管道半径远大于线圈尺寸时，管壁可看作平板导体，问题得到简化。

• Inside the plug is placed a moving tube which has a catch on top, a medicine port, a notch in the tube wall and a positive stop bulkhead at bottom and cooperates with the sling tube.

  瓶塞顶口内插入顶端为动管拉手、下设动管壁出药口、动管壁槽口和动管限位挡板且与吊管动配合的动管。

• Strut of cell of tube wall endodermis, appear hobnail kind dash forward to tubal antrum.

  管壁内皮细胞肿胀，似鞋钉样突向管腔。

• The factors that influenced the analytical results of lead by probe atomization AAS were studied and analytical performances of the method were compared with those by tube wall atomization AAS.

  通过实验，确定了最佳的仪器条件和探针原子化分析条件，并与管壁原子化法进行了比较。

• Based on the process simulation and the analysis method of thermal power system, the tube wall temperature online monitoring system for high temperature heating surface was successfully developed.

  在借鑒过程仿真和热力系统分析方法的基础上，开发了一套锅炉高温受热面金属壁温在线监测系统。

• Abstr: in order to guarantee flame tube wall temperature of high temperature rise combustor, the influence of the multiple incline holes cooling flame tube on combustor performance was investigated.

  文章摘要：为了保证高温升燃烧室火焰筒壁温，进行了多斜孔冷却火焰筒燃烧性能试验。

• During the process of reducing, in case of constant diameter reduction, the major elements responsible for tube wall increase are the rolling temperature and the stretch factor, etc.

  钢管在减径过程中，减径量一定时，影响其增壁量的主要因素是钢管的轧制温度和张力系数等。

• The high-pressure and low-pressure segments are divided into three control volumes, including the refrigerant inside tube, the tube wall and the fluid outside tube that is water or air.

  系统的高、低压段被分成制冷剂侧、管壁、以及水或空气侧三个控制容积。

• To ensure the heater for safe operation, a thermocouple is pro - posed to install on the tube wall to protect the heater tube from coking.

  为保证加热炉安全运行，提出了安装炉管管壁热电偶、强化炉管烧焦等对策。

• Cracks expanded from the inner tube wall to external wall, and divalent sulfur ions were found on the surface of cracks.

  裂纹从管内壁开始向外扩展，裂纹面上有负二价硫离子存在。

• Some heterogeneity has been observed on the tube wall in the aspect of stitch structure and the linear density of constituent fibers.

  线圈结构和纤维的线密度分析显示管壁三部位存在不均匀性。

• The parameters in the aeries include: amount of longitudinal reinforcement, amount of transverse reinforcement, shear span-to-depth ratio, thickness of tube wall and strength of concrete.

  试验中的主要参数有：纵向钢筋的数量、横向配筋率、剪跨比、管壁的厚度及混凝土强度。

• After compared with the result of tests and fitting formula, it is reasonable to deduce the resolution of tube wall stiffness based on the elastic theory.

  基于经典弹性板壳理论推导管壁变形解答，得到管壁变形的解析表达式，并以此计算管壁变形刚度。

• The X-ray backscattering from the inner electrodes and the tube wall of an X-ray image intensifier (XRII) will degrade the spatial resolution and the contrast of an output image.

  影像增强器内电极和管壳对X射线的背向散射将降低增强器输出图像的空间分辨率和对比度。

• With the help of a finite difference method a temperature field distribution calculation is conducted of a membrane water wall, a tube wall with an irregular shape.

  采用有限差分方法对膜式水冷壁这一形状不规则的管壁进行温度场分布计算。

• In this paper, based on beam-column element and single slice wall, a tube wall element is proposed, and is applied to push-over analysis for tall concrete structures.

  本文在梁柱单元、单片墻单元的基础上提出了一种筒体墻单元，并将此单元应用于高层混凝土结构推覆分析中。

• At present, the method for calculating the tube wall temperature in a furnace chamber is not exact.

  针对目前大型煤粉锅炉屏式过热器管壁温度计算不準确的问题，提出了屏式过热器三维管壁温度计算方法。

• The said calculation formula is useful for accurate control of the final tube wall thickness tolerance.

  该计算式对精确控制成品管壁厚精度具有实际意义。