英语释义

1. a centrifugal blower driven by exhaust gas turbines and used to supercharge an engine

2. a device that supplies air to an engine at a higher pressure than normal to increase the engine's power

片语

turbocharger coolant涡轮增压器冷却液

centrifugal turbocharger离心式涡轮增压器

Turbocharger design增压器

turbocharger gasket涡轮增压器密封垫

TwinScroll Turbocharger双涡管单涡轮增压技术

turbocharger model涡轮增压器型号

driven turbocharger废气涡轮增压机

stage turbocharger单级涡轮增压器

exhaust turbocharger废气涡轮增压器

英汉例句

• turbocharger is to increase the pressure, not voltage.

  增压器是增加压力的，不是电压。

• the holset turbocharger is an intrinsic part of the modern diesel engine, delivering efficient combustion and high levels of power density reliably--mile after mile, hour after hour.

  霍尔塞特涡轮增压器是现代柴油发动机不可缺少的部分，它改善燃烧效益，提高功率密度，非常可靠，日复一日，年复一年，我们的焦点很清楚，就是重型涡轮增压器市场。

• so some of the pressure increase from a turbocharger is the result of heating the air before it goes into the engine.

  因此当使用涡轮增压，空气在进入引擎前，就已经因为压缩生热而产生了一些膨胀。

• the conclusions redound to the developing and extending of axial-flow constant press turbocharger with variable nozzle ring, and lay a foundation for later work.

  所获结论有助于带可变喷嘴环的轴流式定压涡轮增压器研制与推广，为以后的研究工作奠定基础。

• the thermodynamic and dynamic sub models of diesel engine and turbocharger are described in detail.

  详细描述了柴油机、增压器的热力学及动力学子模型；

• a large turbocharger can provide lots of boost at high engine speeds, but may have bad turbo lag because of how long it takes to accelerate its heavier turbine and compressor.

  大型涡轮可以在引擎出于高转速时提供更多的动力激增，但因为其涡轮和压缩机的重量偏大，以致加速缓慢，从而产生较严重的涡轮延时。

• an intensity analysis was carried out to the friction weld area of turbocharger shaft with ansys finite element analysis software.

  应用有限元分析软件ansys，对涡轮增压器轴摩擦焊区域进行了强度分析。

• metal bellows are fitted in the pipe system as well as between the turbocharger and the exhaust discharge pipe system.

  金属风箱是装在管道系统中，同样也在涡轮增压器与尾气排放管道系统之间。

• a new kind of axially movable vane turbocharger was presented, and its structure was investigated.

  提出了一种轴向移动喷嘴叶片可变几何截面增压器的新结构方案。

• the main deformity of the center housing cast in the automobile turbocharger is shrinkage cavity.

  在汽车涡轮增压器中心架铸件生产中主要产生缩孔缺陷。

• chongqing radial flow turbocharger factory insist on the tenet 「occupy the market by high-quality products; win users by excellent services」 to serve users at home and abroad.

  重庆径流增压器厂始终坚持「以优质的产品占领市场；用良好的服务赢得用户」这一宗旨，竭诚为国内外用户服务。

• a turbocharged engine may also have reduced power, but the reduction will be less dramatic because the thinner air is easier for the turbocharger to pump.

  涡轮增压引擎同样会减小动力，但减小量将会小的多，因为稀薄的空气更容易被涡轮增压机吸入引擎。

• after the injection of a gaseous mixture of steam and gas into a turbine a change in turbocharger operating condition will take place.

  水蒸气与燃气混合后的混合气体注入涡轮后，涡轮增压器会出现运行状态的变化。

• the engine is equipped with one turbocharger per cylinder bank.

  引擎被装备每气缸焖火一个涡轮增压器。

• among the engine's features are the twin-scroll turbocharger and the high-pressure direct petrol injection system.

  其中发动机的特点是双涡旋增压器和高压将汽油直喷系统。

• one sure way to reduce the inertia of the turbine and compressor is to make the turbocharger smaller.

  一个确实的减小涡轮和压缩机惯量的方法是减小涡轮增压机的尺寸。