英语释义

• generator consisting of a steam turbine coupled to an electric generator for the production of electric power

片语

a turbogenerator汽轮发电机

turbogenerator shaft汽轮发电机轴系

geared turbogenerator齿轮传动汽轮发电机

big turbogenerator大型汽轮发电机

mw turbogeneratormw机组

steam turbogenerator汽轮发电机

turbogenerator stators汽轮发电机定子

turbogenerator sets汽轮发电机组

turbogenerator shafting汽轮发电机组轴系

英汉例句

• The formula calculating the equivalent diameter of torsional stiffness for domestic turbogenerator rotor is presented, and the modelling of some special structures on the rotor is discussed as well.

  针对国产发电机的具体特点，本文首次给出了计算大型发电机转子本体部分扭转等效直径的公式，此外，还对转子上其他一些结构的模化作了探讨。

• The noise level of turbogenerator can be effectively controlled after its vibration level is reduced.

  通过对汽轮发电机组进行减振改进后，机组的噪声都得到有效的控制。

• An optimum adjustment is investigated of the shafting dynamic location of a large-sized turbogenerator unit.

  本文研究了大型汽轮发电机组轴系动态位置的最优调整。

• The cause of vibration on the turbogenerator stator end winding is analyzed, and the meaning of natural frequency test and vibration measurement is discussed.

  本文分析了引起汽轮发电机定子绕组端部振动的原因，以及固有频率试验和振动测量的意义。

• This paper discusses the effect of saturated parameters appearing in the mathematical model of a large turbogenerator on the response calculation of shaft torsional vibration.

  就大型汽轮发电机模型中饱和参数对汽轮发电机组轴系扭振响应计算的影响进行了详细的研究。

• The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.

  本文利用有限元数值计算方法，系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。

• Key technology of spring-key-bar「s assembling and welding of 300MW turbogenerator is introduced.

  本文介绍了300MW汽轮发电机整体弹性定位筋装配及焊接时的关键工艺。

• The example of calculating the excitation field at no-load for a large turbogenerator shows that the advantages of arc elements are highly accurate and easy to use.

  对大型汽轮发电机空载磁场的实例计算表明，圆弧边界单元具有剖分简单、精度高等优点。

• The influence Of tightness and monolith of turbogenerator stator bars insulation on their electrical performance, as well as relation between partial discharge and air gap in insulation are analyzed.

  分析了汽轮发电机定子线圈绝缘的密实性、整体性对线圈电气性能的影响、局部放电与绝缘中气隙的关系。

• In this paper a macro-cracking in the medium casing which is a heavy section casting of 261 turbogenerator was investigated by SEM, EDAX and others.

  采用扫描电镜断口分析、微区能谱分析等方法研究了261汽轮机中汽缸大型铸件开裂问题。

• Gas turbogenerator fault diagnosis can be treated as a pattern classification task.

  燃气轮发电机组的故障诊断，实质上是一个模式分类问题。

• The previous study for coupled lateral and torsional vibration of turbogenerator rotor and shaft system is reviewed and purpose for further study is provided.

  总结了近年来国内外对汽轮发电机组转子及轴系弯扭耦合振动问题的研究进展和成果，并对其进一步研究进行了展望。

• In the process of torsional vibration analysis for turbogenerator rotors, the material characteristics parameters of shafts are often considered to be constant.

  在进行汽轮发电机组轴系扭振分析时，通常假设轴系材料特性参数为常数。

• Improvement of core-making technology was conducted by adopting basic phenolic resin sand for aluminum alloy air guide ring in the turbogenerator produced by Harbin Rlectric Machine Co.

  介绍了我公司在应用堿性酚醛树脂砂工艺生产汽轮发电机铝合金铸件导风环的过程中，对制芯工艺进行的改进。

• This paper presents a method for calculating the modal logarithmic decay ratio of the shaft set torsional vibration in a turbogenerator unit.

  本文给出了一种汽轮发电机组轴系扭转振动模态对数衰减率的计算方法。

• The holy of holies – turbogenerator which produces the very electricity. It」s power is 60 megawatt.

  最神圣的是，涡轮发电机可以发出高达60兆瓦的非常电。

• Actual applications show that the proposed method can effectively diagnose the multi-concurrent vibrant faults of turbogenerator sets and the diagnosis result is correct.

  实际应用表明该方法可以有效诊断汽轮发电机组振动类多重并发故障，诊断结果全面、準确。

• In order to keep up with the advanced technical level abroad and coordinate with the industrial policy in our country, the air-cooled turbogenerator with large capacity must be developed.

  为了追赶世界先进水平，适应我国的产业政策，必须研制和开发大容量空冷汽轮发电机。

• This article briefly introduce the design and operational aspect of water turbogenerator elastic metallic plastic guide bearing.

  本文介绍了水轮发电机弹性金属塑料瓦推力轴承的变形分析和瓦面形状的设计方法。

• In a small thermo-power plant, an segregation accident occurred in the process of concreting a C15 turbogenerator foundation.

  某小型热电厂一台C15汽轮发电机在汽机基座浇筑过程中出现混凝土离析事故。

• The forces and vibration problems of the Windings in large turbogenerator stator slots, under various operating conditions, are studied in the paper.

  本文着重研究了大型汽轮发电机定子槽内线棒在各种工况下的受力与振动问题。