片语

Typical product structure典型产品结构

typical pavement structure典型结构

typical soil structure典型土壤结构

Typical Organization Structure典型的组织结构

asphalt typical pavement structure沥青路面典型结构

typical crystal structure典型晶体结构

typical geological structure models典型地质构造模式

typical welding structure典型焊接结构

Typical shell structure典型板壳结构

英汉例句

• deep groove ball bearings, they have the most typical structure among rolling bearings and have widely usages.

  深沟球轴承，是滚动轴承中最具代表性的结构，用途广泛。

• the experiment has taken a typical structure model as experimental tablet to test the heat transfer characteristic of the porous lamellar tablet.

  本实验选取了一种典型结构的多孔层板作为研究对象，进行了换热特性实验研究。

• taking a typical structure of slider as an example, the design and fabrication of the masks for lithography were given.

  首先以一种典型的磁头滑块结构为例，进行了掩模版的设计与制作；

• the paper gives a detailed introduction to the typical structure and manufacturing method of drum, waterwall, burner and waterwall header of the 300mw double arch furnace boiler produced by dbc.

  文章以dbc制造的300mw「w」形火焰锅炉为例，详细地介绍了锅筒、水冷壁、燃烧器和水冷壁集箱的典型结构和制造方法。

• it also introduces typical structure and function of several geological parameter measurement sensors and logging sensors in lwd at the former base.

  在此基础上，介绍了lwd的几种地质参数测量传感器和录井传感器的典型结构和功能。

• the typical structure of the message they send to obtain this information contains a product identification, a quantity and a target delivery date.

  为了获得此信息而发送的消息的典型结构包括：产品标识、数量和目标配送日期。

• this paper introduces the profibus fieldbus. then it illustrates the design and equipment of fieldbus control system and gives typical structure used in water factory automation.

  介绍了profibus现场总线的特点及其应用情况，并以水厂自动化为例，探讨了profibus现场总线控制系统设计及设备配置方法，给出了典型结构。

• the results can give a basis for investigating the pavement typical structure in this area.

  为进一步研究甘肃黄土地区的路面典型结构打下基础。

• a new calculation method was proposed for the typical structure of the platelet transpiration flux in the rocket thrust chamber based on the test data of another chamber.

  针对典型的层板发汗冷却结构，提出了利用一个推力室的实验数据来计算另一推力室所需发汗流强的方法。

• based on analysing the typical structure of trimming and punching dies, the author proposes a cad system for panel trimming and punching die structure design based on functional component.

  在分析汽车覆盖件修边沖孔模典型结构的基础上，提出了一种基于功能组件的修边沖孔模cad系统结构。

• in this example, we want to go further to ensure that the version string always matches the typical structure of numbers and dots (for example: 4.04, 2.0.18, 5.23.42).

  在这里的范例之中，我们想要进一步地确保版本字符串符合号码与点的典型结构（例如：4.04，2.0.18，5.23.42）。

• the happening mechanism of the typical structure of bubbly flow is analyzed.

  对典型泡状流结构产生的机理进行了分析。

• several typical structure forms of solar greenhouses and the development of solar greenhouses were introduced in this paper.

  本文介绍了辽宁省几种典型日光温室的结构形式及其发展情况。

• the pressure area and velocity area of material in two typical structure nozzle head of air pressed fused deposition modeling(fdm) are analyzed with finite element method and confirmed by experiments.

  对两种典型结构熔融沉积快速成型喷头中材料的压力场和速度场进行了有限元分析和实验验证。

• the implementation principle and typical structure of electrical-heating high gloss injection mold are introduced.

  分析了注塑成型熔接痕的形成机理，介绍了电加热高光注塑模的实施原理和典型结构。

• the results showed that aal had the typical structure of polyol and good dissolvability, though a part of aal was acetylated.

  结果表明：乙酸木质素具有典型的聚多元醇结构，虽然有部分被乙酰化，但它具有很好的溶解性；

• typical structure of the oversea electronically controlled diesel fuel injection mechanism is presented in respect of position control system and time control system.

  从位置控制系统和时间控制系统两方面，介绍了国外电控柴油喷射机构的典型结构；

• it has the typical structure of an expert system.

  系统具有典型的专家系统结构。

• the typical structure of hot runner stack mold was introduced, with emphasis on the up-to-date developments of the technology.

  在介绍叠层热流道模具的典型结构的基础上，着重阐述了当今国内外叠层热流道模技术的发展动态。

• in the past decades of years the typical structure of pipeline steel x70 was the ferrite-pearlite.

  在过去几十年x70级管线钢的典型组织一直是铁素体-珠光体。

• a 5-degree freedom multi-joint instructional robot characterized typical structure of industrial robot was developed for the requirement of teaching of robotics and related courses.

  为满足机器人学及相关课程教学的需要，研制了一种具有工业机器人典型结构特征的5自由度多关节教学机器人。

• the effect of temperature on ultimate axle load of semi-rigid asphalt pavement was explored through theoretical analysis on a typical structure at various temperatures.

  在不同的环境温度下，通过对典型结构的理论分析，探讨温度变化对半刚性沥青路面极限轴载的影响。